Diversity measures in macroinvertebrate and zooplankton communities related to the trophic status of subtropical reservoirs: Contradictory or complementary responses?

Macroinvertebrate communities have been widely used as a tool for assessing the environmental quality of freshwater ecosystems, whereas zooplankton communities have been to some extent neglected. However, the importance of using different indicators to achieve a more comprehensive framework of assessment regarding water quality has been recognized. This study compared estimates of species richness (number of species) and the Shannon–Wiener index for data on macroinvertebrate and zooplankton communities in tropical reservoirs and related them to their trophic state. The trop+hic classification was obtained by applying the Carlson index (1977) modified by Toledo et al. (1983), and the index of the Brazilian Society of the Environmental Technology Agency. The comparative response of the different indicators was analyzed using a series of bivariate correlations (Draftsman’s plot). The results illustrate that diversity measures, namely species richness, responded differently when related to the trophic classification of reservoirs, depending on the community considered. The species richness of zooplankton was positively related to hypereutrophic conditions, due to the higher number of rotifer species, including tolerant generalist species and at the same time, as a result of the exclusion of species from other groups, whereas for macroinvertebrates, species richness was negatively related to hypereutrophic conditions. Melanoides tuberculatus, which exhibits a high tolerance and competitive ability under such conditions, was the dominant species in macroinvertebrate communities, which excluded endemic species and reduced local richness and diversity. The same indicators applied to the zooplankton and macroinvertebrate communities might therefore provide contradictory responses regarding ecological quality assessment in tropical reservoirs, which suggest that zooplankton should be taken into account among the biological quality elements considered in the ecological quality assessment, management, and restoration of water bodies.     

Testing for Validity and Reliability in Cross-Cultural Research

A set of procedures is offered for assessing interraler reliability and certain aspects of validity of codes in cross-cultural studies. The method assumes that at least two independent raters have coded more than one trait. Each trait coded by one rater is correlated with each trait coded by a second, and all the codings by a single rater are intercorrelated with each other. The results are presented in a multitrait-multi-rater matrix. From this matrix it is possible to determine the interrater reliability and discriminant validity of trails in addition to a higher order concept based on pairs of traits.     

Purification of Neuronal Cell Surface Proteins and Generation of Epitope-Specific Monoclonal Antibodies Against Cell Adhesion Molecules

To establish a procedure for the purification of a broad spectrum of cell surface proteins, three separate methods based on different principles were compared with the aid of four marker proteins. Membrane preparation by sedimentation-flotation centrifugation, temperature-induced phase separation with Triton X-114, and lectin affinity chromatography were used separately as well as in combination. The two-step procedure of membrane preparation and lectin affinity chromatography provided by far the best enrichment of cell surface marker proteins. This result was further substantiated by screening greater than 6,600 hybridoma cultures that originated from mice that had been immunized with protein fractions obtained by different purification protocols. In addition, it was found that solubilized glycoproteins used as immunogens led to many more cell surface-specific monoclonal antibodies than glycoproteins immobilized on lectin-agarose beads. Three monoclonal antibodies that recognize distinct epitopes of cell adhesion molecules (CAMs) were isolated. Monoclonal antibody C4 bound to a detergent-labile epitope of G4 (neuron-glia CAM). Monoclonal antibody D1 recognized specifically nonreduced neural CAM (N-CAM) with intact disulfide bridges, and monoclonal antibody D3 recognized only the 180-kilodalton isoform of N-CAM. Because of these specificities, these monoclonal antibodies promise to be useful tools for the elucidation of the structural organization of adhesion molecules.     

A novel galactosyl-binding lectin from the plasma of the blood clam,Anadara granosa (L) and a study of its combining site

Control Analysis has been carried out in the first steps of a rat liver glycolytic system. Attention has been focused on the effect of several glucose concentrations on the control, particularly regarding the role of glucokinase. From kinetic studies of the whole metabolic system we have obtained information on the flux variation under different glucose concentrations. This information together with the kinetics of glucokinase has allowed us to calculate Flux Control and Elasticity Coefficients for glucokinase and the Response Coefficient of the system with respect to glucose. The changes in of the value of Flux Control Coefficients demonstrates that in conditions of low glucose concentration, glucokinase is the main enzyme in controlling the flux through the pathway, but at high glucose concentration the control moves to phosphofructokinase. Next, we have compared our results with those obtained with the shortening and titration method, previously described (Torres, N.V., Mateo, F., Mélendez-Hevia, E. and Kacser, H., (1986) Biochem. J. 234, 169–174; Torres, N.V. and Meléndez-Hevia, E. 1991. Molec. Cell. Biochem. 101, 1–10). Furthermore, from knowledge of the enzyme kinetics of the system we have been able to build a model of the pathway that allows us computer similation of its behavior and calculation of the Flux Control Coefficient profile at different glucose concentrations. By the three methods the results correlate, supporting the use of the pathway substrate as external modulator of the metabolic system as a tool for practical application of Control Analysis.     

Thermographic visualization of cell death in tobacco and Arabidopsis

Pending cell death was visualized by thermographic imaging in bacterio‐opsin transgenic tobacco plants. Cell death in these plants was characterized by a complex lesion phenotype. Isolated cell death lesions were preceded by a colocalized thermal effect, as previously observed at sites infected by tobacco mosaic virus (TMV) ( Chaerle et al. 1999 Nature Biotechnology 17, 813–816). However, in most cases, a coherent front of higher temperature, trailed by cell death, initiated at the leaf base and expanded over the leaf lamina. In contrast to the homogenous thermal front, cell death was first visible close to the veins, and subsequently appeared as discrete spots on the interveinal tissue, as cell death spread along the veins. Regions with visible cell death had a lower temperature because of water evaporation from damaged cells. In analogy with previous observations on the localized tobacco–TMV interaction ( Chaerle et al. 1999 ), the kinetics of thermographic and continuous gas exchange measurements indicated that stomatal closure preceded tissue collapse. Localized spontaneous cell death could also be presymptomatically visualized in the Arabidopsis lsd2 mutant.     

The role of duplication in the expression of a variable surface glycoprotein gene of Trypanosoma brucei

The variable surface glycoprotein (VSG) genes of Trypanosoma brucei have been classified into two groups depending upon whether or not duplication of the genes is observed when they are expressed. We report here the observation of duplication apparently linked to expression of the ILTaT 1.3 gene in the ETaR 1 trypanosome stock. In the ILTaR 1 stock, expression of the ILTaT 1.3 VSG did not involve a new duplication, but instead activation of a preexisting gene copy that had been apparently generated earlier by a duplication event analogous to that directly observed in the ETaR 1 trypanosomes. The results suggest that the well-characterised gene duplications found with other VSG genes are common to all VSG genes but are not directly responsible for controlling expression. All currently available data can be accommodated by a model that assumes that gene duplication and replacement occurs independently of antigenic switching.     

Optimization of pancreatic lipase inhibition by Cudrania tricuspidata fruits using response surface methodology

The fruits of Cudrania tricuspidata (Carr.) Bur. (Moraceae) significantly inhibited pancreatic lipase, which plays a key role in fat absorption. Optimization of extraction conditions with minimum pancreatic lipase activity and maximum yield was determined using response surface methodology with three-level-three-factor Box–Behnken design (BBD). Regression analysis showed a good fit of the experimental data and the optimal condition was obtained as ethanol concentration, 74.5%; temperature 61.9 °C and extraction time, 13.5 h. The pancreatic lipase activity and extraction yield under optimal conditions were found to be 65.5% and 54.0%, respectively, which were well matched with the predicted value of 65.8% and 47.1%. Further fractionation of C. tricuspidata extract resulted in the isolation of compound 1, which was identified as 5,7,4′-trihydroxy-6,8-diprenylisoflavone. It inhibited pancreatic lipase activity with IC₅₀ value of 65.0 μM. HPLC analysis suggested positive correlation between pancreatic lipase inhibition and 5,7,4′-trihydroxy-6,8-diprenylisoflavone of C. tricuspidata fruits.     

An Estimation Procedure for the Joint Distribution of Spatial Direction and Thickness of Flat Bodies Using Vertical Sections. Part II: An application in soil micromorphology

In soil micromorphology fissures are considered in vertical sections. To get information about the properties of the soil the joint distribution of spatial direction and width of these fissures is of interest. The fissures are mathematically generalized to flat bodies which are defined as stationary weighted surface processes with the weight “thickness”. In a typical point of the surface process suitable, joint parametric distributions of direction and thickness are assumed. The parameters have to be estimated from measurements on vertical sections which are taken from the soil. On these sections only a visible thickness and a visible angle can be observed. The joint distribution of these variables can be expressed by the joint distribution of spatial direction and thickness with the same parameters and in this indirect way the parameters can be estimated. The paper describes how to randomize the vertical section and how to measure the visible variables on the sections. The Chi-Square method is proposed for the parameter estimation. Further it is discussed how to derive good starting values for the numerical procedure. All this is demonstrated in a simulation study using the Bingham-Mardia distribution for the direction and the lognormal distribution for the thickness including a way to correlate the mean thickness and the direction. Finally an application in soil micromorphology is demonstrated for one soil horizon.